|
|
|
Key Features of the C2-7260/7210/7200
- Analog to HD-SDI Up,
Down, Cross Conversion
- SD-SDI to HD-SDI Cross
Conversion
- Dual Independent
Scaling Engines
- Delay free HD-SDI
Audio Pass-Thru
- 4:4:4 Sampling for
full bandwidth color
- 17 (or 11)
Multi-format Inputs:
- 3x Composite Video,
- 3x YC (S-Video),
- 8x SD/HD-SDI (2x on
C2-7210 & C2-7200),
- 3x DVI (also handles
RGB, YUV & YPbPr)
- 2 Independent Output
Channels, each with:
- SD/HD-SDI,
- Composite Video,
- YC (S-Video),
- DVI-I (also handles
RGB, YUV & YPbPr)
- Multiple Conversion
& Scaling products in one
- Multi-format Inputs –
Digital and Analog
- Analog RGB to
2048x2048 and HDTV to 1080p
- Genlock any Video
Input to any other
- Seamless Switching
with Cuts, Fades or Effects
- Unrestricted Dual PIP
- Any Input over any other
- Multiple Layering and
Windowing Capability
- Flexible Key Layering
- Background Lock Source can be moved to the Foreground
- RS-232 & IP
Interface Remote Control
- External Control by
Windows Control Panel
- External Control by
Third Party Control Systems
- External Hardware
Control by Optional CC-300
- CORIO2® Technology
Conversion Engines
- Zoom up to 1000% with
full Positioning
- Image Shrink to 10%
with full Positioning
|
|
|
|
|
|
 1T-C2-511 is a high performance converter that transforms HD-SDI signals to
DVI-I, both digital and analog. Designed for broadcast and professional use,
the unit provides a highly reliable conversion with reclocking and
equalization of the input. It also handles 525i or 625i SD-SDI signals,
converting them to 480p and 576p respectively. HD-SDI HDTV resolutions from
720p to 1080i 60Hz are accommodated. Embedded Stereo Audio may be extracted
from the SD or HD-SDI input. Any one of the eight available stereo channels
may be selected and output in analog and AES3-id digital formats. The 1T-C2-511
is controlled via front panel buttons and an on-screen display. The unit is
housed in a Desktop metal case and an optional Single/Dual Rackmount Kit is
available.
|
|
|
|
|
 C2-2300 Universal Video Switcher/Scaler series is
based on TV One's exclusive CORIO2™ technology and provides high quality
scaling in any direction between standard video, DVI or Analog computer and
HDTV signals. NTSC and PAL standards are supported. Input and Outputs can be
Composite Video, S-Video, YUV Component, YPbPr (Progressive Scan) Component
or RGB. Our exclusive AutoSet® feature takes the hassle out of setup by
automatically sizing and positioning the computer image to fit exactly on the
video screen. Signal parameters of the incoming video may be adjusted. All
settings are stored in non-volatile memory and are retained even when power
is switched off. The high resolution RGB/YPbPr outputs are selectable as any
computer resolution up to 2048x2048 at any vertical refresh rate or any HDTV
resolution up to 1080p. A wide variety of computer signal formats are
available to support PC, Mac and Workstation formats. C2-2355
provides an SDI Output in addition to all of the features of the C2-2350. All
the functions can be controlled via the front panel Push Buttons, an Infrared
Control Remote Unit or via an RS-232 or IP connection. A Windows Control
Panel is provided and most third party control systems interface directly
with the entire C2 range of products. A front panel LCD makes setup easy.
Variable Zoom to 10X allows you to enlarge any part of the computer screen to
fill the entire video screen and position controls allow you to move around
to any area desired. Variable Shrink to as little as 10% allows fitting the
image onto most displays. The advanced Digital Flicker Elimination circuitry
and high sampling rate insures crisp, clear images, while full bandwidth
chroma sampling insures faithfully reproduced, high resolution colors. Motion
compensation and a 3:2 Pulldown feature for NTSC greatly improves image quality.
Stereo Audio switching is provided by
an integral 4x1 audio routing switcher. The four impedance-independent
unbalanced inputs follow the video input selection. A rear panel terminal
block provides access.
PIP, Chromakey, Lumakey, Mixing and Genlock are among the advanced
standard features. The Key Mode allows computer graphics to be keyed over an
external Composite or S-Video signal. The keyed image may be faded in and
out. Due to the 4:4:4 sampling format, precise keying at the pixel level can
be achieved. The Mix Mode permits glitch-free mixing between the computer
image and external video. The Picture-in-Picture Mode allows either of the
computer inputs to be inset in a window over either of the video inputs or
visa versa. The PIP window may be placed anywhere on the screen. The Genlock
feature insures precise synchronization of the incoming signals by providing
a wide Subcarrier lock range with Subcarrier phase adjustment. C2-2000 series
units are housed in desktop cases and rackmount kits are available as an
option.
Edge Blending is a standard feature of
the C2-2350 and C2-2355. Because of the ability to ‘feather’ any or all of
the edges, multiple images can be aligned vertically, horizontally, or both
to create unusual displays. Using multiple C2 units, there is no limit to the
number of blended images. Edge Blending is not limited to high resolution RGB
computer images, but can be applied to any input. Gamma correction is
employed to compensate for many of the problems faced when blending between
projectors. Special preparation of the video in advance is not necessary,
since all processing is done within the C2 unit.
Input Expansion to add additional DVI, RGB,
YPbPr, YUV, Composite or S-Video inputs is easy by using any of the optional
S2 Series Input Expansion Switchers. The S2 unit links to any C2-2000 series
unit via an Options Interconnect Cable and becomes an integral part of scaler
from a control and operational standpoint. The routing of these additional
inputs is controlled directly from the control system of the C2. Multiple
different S2 models may be simultaneously connected to a single C2, providing
virtually unlimited input flexibility.
|
|
|
|
 PX-720
Standards Converter provides professional quality conversion of numerous worldwide PAL,
SECAM and NTSC broadcast television standards. Motion Compensation improves
the conversion process. The integral Time Base Corrector with full
Synchronization allows the unit to be genlocked to a Composite Video source.
The TBC is active even in the Bypass Mode. High performance is achieved by
using Digital Conversion and Digital Comb Filtering in the decoding process.
Internal 10-bit accurate A/D and D/A conversion circuitry is employed for
true 8-bit resolution. Black with Color Burst, Color Bars or Frozen Last
Field is sent to the output when the input video is not present. An automatic
gain circuit insures that the proper video output level of 1V p-p is
maintained, even when the input signal varies between 0.5V and 2.0V p-p. The
unit has two Composite and one S-Video input. Processing controls are
provided for Luminance, Chrominance, Setup, Hue (NTSC). Optional Dual
Rackmount available.
|
|
|
|
|
 MX-2522
& MX-2541 VGA Routing Switchers are ultra compact, high performance products
designed to meet the most demanding requirements for computer signal routing.
The MX-2522 is a 2 Input x 2 Output Matrix Router, so either input may be
routed to either, or both, outputs. The MX-2541 is a 4 Input x 1 Output
Router. Video Bandwidth of 300MHz insures these products will provide a video
output that is identical to the source signals. Input selection is via front
panel push buttons. The units provide VESA industry standard DDC (Data
Display Channel) bi-directional communications between the outputs and the
host PC for Plug and Play compatibility and host control of the downstream
monitors. Input and Output connectors are HD-15 type. A Power Adapter is
included. For best performance, use high-grade output cables such as our
professional Z-Plus type.
|
|
